This family of pneumatic valve spring presses are easy to use for disassembly and assembly of valves in different types of cylinder heads. Designed to offer the ultimate performance with unbeatable speed and efficiency. They will accept virtually any size, from small motorcycle heads to one meter plus cylinder heads, and due to an adjustable bed and post, tilted valves will be easily handled as well.
Delivered fully assembled - almost ready to use
Before use recommended:
- VFP bolted to work station
- Connected to the compressed air system
No clamping of the cylinder head is required, and the aligning is easy with the head positioning wheels. Once aligned, all valves in line will quickly be released from keepers and springs in the disassembly process.
Trego VFP 500 700 and 900 will handle valve springs with a spring force up to 200 kg, at 7 bars air pressure (recommended), and 285 kg at 10 bars (maximum). Normally the valve spring presses are operated via a foot pedal. An optional two-hand-control is available, if required for safety reasons.
FEATURES:
- A floating counter hold punch that will hold the valves in position during the disassembly and assembly process. It will operate on the valve once the pressure foot makes contact with the valve spring.
- A range of adjustments that will handle angled or tilted valves . The table and the cylinder head may be tilted up to 45 degrees towards the operator and 30 degrees away. The post can be tilted up to 25 degrees in both directions. Tilting the post will also tilt the counter hold punch so that it and the pressure foot aways align with the valve.
- Once the pressure foot is in line with the valve, the VFP is ready to operate on the valve spring. The movement of the pressure foot along the post is bi-directional controlled via an exact foot pedal. A slide hammer is attached in line with the pressure foot. It is handy to use if valve keepers are stuck.
- Delivered with a standard 28 mm pressure foot. Additional pressure foots , 18, 21, 23 and 35 mm available as options.
OPTIONS FOR VFP 500 / VFP 700 / VFP 900:
- Laser pointer
- Two-hand control
- Scale for post angle
- Air lock
- Air regulator
- Level with magnet